Rotating LT

One of my colleagues asked this morning how to easily rotate the view (and UCS) to help with drawing, now in full version of AutoCAD this is simplicity itself.

Rotate from Viewcube
Rotate from Viewcube

Just click on the arrows above the Viewcube to rotate the view and UCS simultaneously.

In AutoCAD LT this is more difficult, you can either use one of several command line methods, either using PLAN or UCS by object etc.

OR, this method seems to be easier (though it needs a little setting up). And here is how to do this.

Firstly, AutoCAD (LT) 2013 seems to come “out-of-the-box” with certain Panels turned off in the Ribbon. One of which is the UCS coordinate panel (why would they do this?) on View Tab.

Turn on coordinates panel.
Turn on coordinates panel.

Click on the View Tab and then right click anywhere on the panels below, then go to Show Panels, Coordinates. Now you have the coordinates panel which should have been there in the first place.

Secondly you need to make sure the view rotates with the UCS when you change the UCS. To do this click on the little arrow to bottom right of the Coordinates Panel, this brings up the UCS options box, Click “Update view to Plan when UCS is changed.” Click OK!

Enable Plan to Rotate with UCS
Enable Plan to Rotate with UCS

Now we are ready to go! (Phew!)

Rotate about the Z axis
Rotate about the Z axis

Click on the drop down menu which has Axes and a rotate arrow. Click on the Z icon and voila you can now rotate around the Z axis and the drawing will follow. The default selection is 90 degrees so hitting enter after clicking will rotate by 90 degrees.

So now its “one click and enter” to rotate the view and UCS in AutoCAD LT versus the “one click” in full version, hopefully a simpler method than all the command line options!

One Reply to “Rotating LT”

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.